水泵 Weima 65-55 35000 l/h

Weima WMQBL65-55 is a secure, self-priming water pump, which is used for pumping, feeding, over pumping and water dumping of different liquids.

You will not find a better partner for your tasks than the Weima WMQBL65-55 water pump!

If you need to pump water to a high altitude or create a drip irrigation system on your entire agricultural plot, than you need WMQBL65-55, which can push fresh water up to a height of 50 meters! In dry seasons, this high-pressure water pump is used for supply water over long distances, fill or empty various types of tanks, eliminate the consequences of flooding, extinguish fires, and much more.

Water pump Weima WMQBL65-55 is equipped with the powerful and stable 4-stroke petrol engine Weima W210. Such 1-cylinder motor has 7 HP and very efficient air-cooling system. High-pressure water pump Weima WMQBL65-55 is able to pump 35 m³ of water for 1 hour, its suction depth is about 6 meters and it can lift water up to 55 meters’ height. The size of input 65 mm (2.5″) and output – 50 mm (2”). Liquids pumped by this model can include various big particles up to 5 mm in diameter. Two conical nozzles are added to the kit in order to allow you easily connect any standard hoses and pipes of the appropriate size and special filter element will protect the water pump from swamping large subjects inside.

Petrol water pump Weima WMQBL65-55 is very simple and does not require any special and often maintenance. There is a special oil-filling hole on the engine of the water pump, which simplifies maintenance of the device. It is necessary to fill in the water before starting the engine and using water pump. There is a special plug on the top of the water pump, which helps to fill in the metal case of water pump with water. Residual water should be drained after each use of water pump with the help of slur plug.

The water pump engine is not only reliable, but also environmentally friendly! It meets all the requirements of the exhaust gas standards in accordance with Euro 5.